Space to think things through

Articles

Practical ideas for the clinic decisions that deserve more than a quick answer.

Clinical Practice10 min readNov 21, 2026

Dental Charting Explained: Notation, Symbols, BPE and Perio Charts

A practical guide for dental nurses, students and new associates: FDI, Palmer and Universal notation, charting symbols, BPE codes by sextant and the 6-point perio chart.

By Medicasimple TeamClinical Practice guide
Dental chart in Palmer notation from UR8 to LL8, with existing work in pink, planned treatment in orange and completed treatment in blue

Article

A dental chart is the shared record of a patient's mouth. Everyone who treats or supports that patient reads it. If you are a dental nurse in training, a dental student or a new associate, learning to chart well is one of the first skills you need in surgery.

This guide covers the parts you will use every day: tooth notation, charting symbols, the Basic Periodontal Examination (BPE) and the 6-point perio chart. The clinical rules on the BPE come from the British Society of Periodontology (BSP) guidelines, so you can check them at the source.

What is dental charting?

Dental charting is recording the state of every tooth and the gums around it. A complete chart answers three questions about each tooth:

  • What is there now? Missing teeth, existing fillings, crowns, implants and root canal fillings.
  • What needs treatment? New findings, such as a cavity on a named surface.
  • What has been done? Treatment completed since the plan was made.

A chart usually has two parts. The hard tissue chart shows the teeth and the work on them. The periodontal chart shows the health of the gums and supporting tissues, starting with the BPE.

In many practices the dentist examines and calls out findings while the dental nurse records them. That is why notation matters so much. The dentist says a tooth and a surface, and the nurse has to put it in exactly the right place.

Tooth notation: FDI, Palmer and Universal

Tooth notation is the shorthand for naming a single tooth. You will meet three systems. Whichever one you use, the chart is drawn as if you are facing the patient, so the patient's right side is on the left of the chart.

FDI (ISO 3950) two-digit notation

The FDI World Dental Federation system, also published as the international standard ISO 3950, gives every tooth two digits.

  • The first digit is the quadrant. For adult teeth: 1 is upper right, 2 is upper left, 3 is lower left and 4 is lower right. Baby (deciduous) teeth use 5, 6, 7 and 8 for the same quadrants.
  • The second digit is the tooth, counted from the midline. Adult teeth run from 1 (central incisor) to 8 (third molar). Deciduous teeth run from 1 to 5.

So 16 is the upper right first molar, 36 is the lower left first molar and 55 is the upper right second deciduous molar. FDI is also the notation the BSP uses for its BPE sextants.

Palmer notation

Palmer notation (also called Zsigmondy-Palmer) draws a small corner around the tooth number. The shape of the corner shows the quadrant: ┘ for upper right, └ for upper left, ┐ for lower right and ┌ for lower left. Adult teeth are numbered 1 to 8 from the midline, and deciduous teeth are lettered A to E.

The corner is easy to draw by hand but hard to show in typed records, so a typed version writes the quadrant as letters instead: UR, UL, LR and LL. The upper right first molar becomes UR6, and the upper right second deciduous molar becomes URE. Palmer has long been the preferred notation of dental students and practitioners in the UK, so expect to see it in UK practices.

Universal Numbering System

The Universal system numbers adult teeth from 1 to 32. It starts at the upper right third molar (1), runs along the upper arch to the upper left third molar (16), then drops to the lower left third molar (17) and runs back to the lower right third molar (32). Deciduous teeth use the letters A to T. Despite the name, it is mainly used in the United States.

Watch out when a number could belong to two systems. In FDI, 11 is the upper right central incisor. In Universal, 11 is the upper left canine.

The same teeth in all three systems

ToothFDIPalmerUniversal
Upper right first molar166┘ (UR6)3
Upper left central incisor21└1 (UL1)9
Lower left first molar36┌6 (LL6)19
Lower right canine433┐ (LR3)27

How to chart teeth, step by step

Every practice has its own routine, but a good charting habit looks much the same everywhere:

  1. Check the notation and the key. Before the first patient, confirm which notation the practice uses and how its key shows existing, planned and completed work.
  2. Follow one route round the mouth. Work quadrant by quadrant in the same order every time, for example upper right, upper left, lower left, lower right (1, 2, 3, 4 in FDI). A fixed route makes a skipped tooth easy to spot.
  3. Record what is already there first. Chart missing teeth and existing work before any new findings. This keeps the patient's starting point separate from the treatment you are about to plan.
  4. Name the surface. A finding is only useful if it says which surface is affected. Use the surface names in the table below.
  5. Ask if you are unsure. If you did not catch a tooth or a surface, ask before you write it. A wrong tooth on the chart can become a wrong tooth in the treatment plan.
  6. Record the BPE. The BSP says every new patient should have a BPE, and patients with codes 0, 1 or 2 should have one at every routine examination.
SurfaceWhere it is
MesialThe side closer to the midline of the face
DistalThe side further from the midline
OcclusalThe biting surface of back teeth
IncisalThe biting edge of front teeth
BuccalThe cheek side of back teeth
LabialThe lip side of front teeth
LingualThe tongue side
PalatalThe tongue side of upper teeth, next to the hard palate

Dental charting symbols: existing, planned and completed work

There is no single national key for charting symbols. Dental schools, practices and software each use their own, so the first thing to learn in a new practice is its key. On paper, keys often use one pen colour for existing work and another for work still needed, but which colour means what is not the same everywhere.

Whatever the key looks like, it has to show the same things clearly:

  • Missing and unerupted teeth, so nobody plans treatment on a tooth that is not there.
  • Existing work: fillings by surface, crowns, bridges, implants and root canal fillings.
  • Findings that need treatment, such as a cavity on a named surface.
  • Completed treatment, so the chart shows what has been done since the plan was made.

The most important habit is keeping those three states apart: what the patient arrived with, what is planned, and what is done. Mixing them up is how a crown placed years ago ends up on a new treatment plan.

As one example, this is how Medicasimple shows the three states. The patient's existing condition is recorded on a Base Chart and shown in pink. Planned treatment is orange, and completed treatment is blue. These colours sit on the tooth and root drawings above and below the chart. In the four-row Palmer grid between them, planned treatment sits in the outer rows, while existing work and completed treatment share the inner rows next to the centre line.

Palmer dental chart from UR8 to LL8 with tooth and root drawings above and below a four-row grid of charting symbols

BPE scoring by sextant

The Basic Periodontal Examination is a quick screening of the gums. The BSP describes it as a screening tool that shows how much further examination is needed. It should not be used for diagnosis.

The six sextants

The mouth is divided into six sextants, and you record the highest score in each one. The BSP gives the sextants in FDI notation:

SextantTeeth (FDI)
Upper right17 to 14
Upper anterior13 to 23
Upper left24 to 27
Lower right47 to 44
Lower anterior43 to 33
Lower left34 to 37
  • Examine every tooth in the sextant. Third molars are left out unless the first or second molars are missing.
  • A sextant needs at least two teeth to be scored.
  • Use a WHO BPE probe. It has a 0.5 mm ball end and a black band from 3.5 mm to 5.5 mm. Probe lightly, at 20 to 25 grams.
  • "Walk" the probe around every site in the sextant before moving on. If you find a code 4, keep going round that sextant so you do not miss a furcation.

What the BPE codes mean

CodeWhat you find and what the BSP suggests
0Pockets under 3.5 mm, no calculus or overhangs, no bleeding on probing. The black band stays fully visible.
Next step: No need for periodontal treatment
1Pockets under 3.5 mm, no calculus or overhangs, but bleeding on probing. The black band stays fully visible.
Next step: Oral hygiene instruction (OHI)
2Pockets under 3.5 mm with calculus or overhangs, above or below the gum. The black band stays fully visible.
Next step: As for code 1, plus removal of plaque retentive factors, including all calculus above and below the gum
3Probing depth 3.5 to 5.5 mm. The black band is partly visible, which means a pocket of 4 to 5 mm.
Next step: As for code 2, plus root surface debridement (RSD) if required
4Probing depth over 5.5 mm. The black band disappears, which means a pocket of 6 mm or more.
Next step: OHI and RSD. Assess the need for more complex treatment; referral to a specialist may be needed
*Furcation involvement
Next step: Treat according to the code, and assess the need for more complex treatment or referral

If you find a furcation, record both the number and the asterisk, for example 3*. A finished BPE is written as a small grid of six boxes, upper sextants on top. The BSP gives this example:

433*
-24*

What happens after the BPE

  • Codes 0, 1 and 2: record the BPE again at every routine examination.
  • Code 3: start initial therapy, including oral hygiene instruction and risk factor control. After that, record a 6-point pocket chart for that sextant only.
  • Code 4 in any sextant: record a 6-point pocket chart for the whole mouth.
  • Radiographs should be available for every code 3 and code 4 sextant.
  • Implants: do not use the BPE around implants. Use 4-point or 6-point pocket charting instead.

The BPE cannot show how a patient responds to periodontal treatment, because it does not show how individual sites change. For patients under 18, the BSP publishes a separate guideline on periodontal screening for children and adolescents.

The 6-point perio chart

A 6-point pocket chart measures six sites on every tooth: mesial, middle and distal on the cheek or lip side, and the same three on the tongue or palate side. It gives the detail the BPE cannot.

The BSP sets out a few rules for it:

  • Measure all six sites on each tooth. You only need to record sites of 4 mm and above.
  • Always record bleeding on probing with a 6-point chart.
  • To judge how treatment worked, record a 6-point chart before and after treatment.
  • Patients in the maintenance phase after periodontitis treatment need full probing depths recorded at least once a year.

Besides pocket depths, a full perio chart usually has rows for recession, bleeding, suppuration, furcation and mobility. Comparing the latest chart with the previous one shows which sites have improved and which have got worse.

Six-point periodontal chart for the upper teeth with rows for pocket depths, recession, bleeding, suppuration, furcation and mobility

Paper or software charting?

Both work. Each has real strengths and real weak spots.

Paper charts cost almost nothing, work without a screen and are quick once you know the key. Palmer's corner symbols are easy to draw by hand. The weak spots show up later. Paper charts often sit in folders nobody opens, and comparing two perio charts means laying sheets side by side. When the paper chart is the first record, someone usually types it up again afterwards.

Charting software keeps the chart, the treatment plan and the perio history in one record. Status is visible at a glance, and previous perio exams are a click away for comparison. The honest downside is that some systems are slower than pen and paper. Too many clicks to mark one tooth, or a perio screen that cannot keep up with the numbers being called out, will frustrate a surgery quickly. If you are choosing software, time how long it takes to chart a full mouth and a perio chart.

If you want to see how this works in practice software, here is how dental charting works in Medicasimple: ISO or Palmer notation, a Base Chart for existing work, a treatment plan that updates as you chart, and BPE and perio charts in the same patient record.

Key points

  • Learn your practice's notation and charting key before your first session.
  • FDI uses two digits (quadrant, then tooth). Palmer uses a quadrant corner or UR, UL, LR and LL. Universal numbers teeth 1 to 32.
  • Keep existing, planned and completed work clearly apart.
  • Record the highest BPE score in each of the six sextants, plus an asterisk for any furcation.
  • A code 3 leads to a 6-point chart for that sextant after initial therapy. A code 4 leads to a 6-point chart for the whole mouth.

Frequently asked questions

What is dental charting?

Dental charting is recording the condition of every tooth and the gums around it: missing teeth, existing work, findings that need treatment, completed treatment and periodontal measurements such as the BPE.

Which tooth notation is used in the UK?

Palmer notation has long been the preferred system of dental students and practitioners in the UK, often typed as UR, UL, LR and LL (for example UR6). The FDI two-digit system (ISO 3950) is the international standard, and the BSP uses it for the BPE sextants. Check which one your practice uses.

What do the BPE codes 0 to 4 mean?

Code 0 means pockets under 3.5 mm with no calculus, overhangs or bleeding. Code 1 adds bleeding on probing. Code 2 adds calculus or overhangs. Code 3 is a probing depth of 3.5 to 5.5 mm, and code 4 is over 5.5 mm. An asterisk marks furcation involvement.

When do you need a 6-point pocket chart?

Under the BSP guidelines, a code 3 leads to a 6-point chart of that sextant after initial therapy, and a code 4 in any sextant leads to a 6-point chart of the whole mouth. A 6-point chart before and after treatment also shows how the patient responded.

Are dental charting symbols the same in every practice?

No. Dental schools, practices and software each use their own key. Learn your practice's key first, and make sure it keeps existing work, planned treatment and completed treatment clearly apart.